Tux Paint
versión 0.9.26

Documentación de opcións

5 Febreiro 2021

Tux Paint Config.

Está dispoñible unha ferramenta gráfica que lle permite cambiar o comportamento de Tux Paint. Non obstante, se prefire non instalar e usar esta ferramenta, ou quere comprender mellor as opcións dispoñibles, siga lendo.

Ficheiro de configuración

Pode crear un ficheiro de configuración sinxelo para Tux Paint, que lerá cada vez que o inicie.

O ficheiro é simplemente un ficheiro de texto sinxelo que contén as opcións que quere activar habilitar:

Usuarios de Linux e Unix

O ficheiro que debe crear chámase «.tuxpaintrc» e debería colocarse no seu directorio persoal. (tamén coñecido como «~/.tuxpaintrc» ou «$HOME/.tuxpaintrc»)

Ficheiro de configuración de todo o sistema

Antes de ler este ficheiro, le un ficheiro de configuración en todo o sistema. (De xeito predeterminado, esta configuración non ten axustes activados.) Atópase en:

/etc/tuxpaint/tuxpaint.conf

Pode desactivar a lectura deste ficheiro por completo, deixando os axustes como predeterminados (que poden ser substituídos polo seu ficheiro «.tuxpaintrc» e/ou argumentos da liña de ordes) usando a opción da liña de ordes:

--nosysconfig

Usuarios de macOS

O ficheiro que debe crear chámase «tuxpaint.cfg» e debería colocalo no seu cartafol persoal, baixo o subcartafol: Library/Application Support/TuxPaint

Ficheiro de configuración de todo o sistema

Antes de ler este ficheiro, le un ficheiro de configuración en todo o sistema. (De xeito predeterminado, esta configuración non ten axustes activados.) Atópase en:

/Library/Application Support/TuxPaint/tuxpaint.cfg

Usuarios de Windows

O ficheiro que debe crear chámase «tuxpaint.cfg» e debería colocarse no cartafol de Tux Paint.

Pode usar NotePad ou WordPad para crear este ficheiro. Asegúrese de gardalo como texto simple e asegúrese de que o nome do ficheiro non teña «.txt» ao final...

Opcións dispoñíbeis

Os seguintes axustes pódense estabelecer no ficheiro de configuración. (A configuración da liña de ordes substituirá estes. Vexa a sección «Opcións da liña de ordes», a continuación.)

fullscreen=yes

Executar o programa en modo de pantalla completa en vez de nunha xanela.

fullscreen=native

Executar o programa en modo de pantalla completa. Ademais, asume a resolución actual da pantalla (estabelecida polo sistema operativo).

windowsize=TAMAÑO

Executar o programa a un tamaño diferente (en modo xanela) ou a unha resolución de pantalla diferente (en modo de pantalla completa), en lugar do predeterminado (normalmente 800x600).

O valor TAMAÑO debería presentarse en píxeles, en formato «largo por alto», cun «x» (X minúsculo) entre os valores. O tamaño pode ser calquera que teña polo menos 640 de largo e polo menos 480 de alto.

Algúns exemplos:

640x480

1024x768

768x1024

1600x1200

orient=portrait

Cambia as opcións de largo/alto dadas a Tux Paint, útiles para xirar a xanela nas pantallas verticais, como unha tableta que está en orientación de tableta.

native=yes

Ao executar Tux Paint en modo de pantalla completa, isto asume a resolución actual da pantalla (anulando calquera opción «windowsize»), segundo o estabelecido polo sistema operativo.

buttonsize=TAMAÑO

Estableza o tamaño dos píxeles dos botóns na interface de usuario de Tux Paint (substituíndo o predeterminado de «48»). Útil cando se usan pantallas de alta densidade ou dispositivos de entrada groseiros, como rastrexadores de ollos.

The TAMAÑO value should be presented in pixels, and can be anything between 24 and 192, inclusive. Most buttons are square, and this will affect their width and height.

allowscreensaver=yes

De xeito predeterminado, Tux Paint impide que o protector de pantalla do seu sistema se inicie. Pode anular isto empregando a opción «allowscreensaver». Nota: Isto require a versión 1.2.12 ou superior da biblioteca SDL. (Tamén pode facelo configurando a variábel de contorno «SDL_VIDEO_ALLOW_SCREENSAVER» do seu sistema en «1».)

nosound=yes

Desactivar os efectos de son. (Nota: Ao premer [Alt] + [S] non se poden volver activar os sons se se desactivaron usando esta opción).

nostereo=yes

Desactivar a compatibilidade con panorama estéreo. (Útil para usuarios con discapacidade auditiva nun oído ou lugares onde se está a empregar un só altofalante ou auricular.)

noquit=yes

Desactivar o botón «Saír» na pantalla e evitar saír de Tux Paint coa tecla [Escape].

Usar a combinación de teclado [Alt] + [F4] ou premer no botón de peche da xanela (asumindo que non está en modo de pantalla completa) segue a funcionar para saír de Tux Paint.

Tamén pode usar a seguinte combinación de teclado para saír: [Maiúsculas] + [Control] + [Escape].

noprint=yes

Desactivar a función de impresión.

printdelay=SEGUNDOS

Restrinxir a impresión para que só poida producirse unha vez cada SEGUNDOS segundos.

printcommand=ORDE

(Só Linux e Unix)

Use a orde ORDE para imprimir un ficheiro en formato PostScript cando se preme no botón «Imprimir». Se esta opción non está especificamente definida, o comando predeterminado é:

lpr

Nota: As versións de Tux Paint anteriores ao 0.9.15 enviaban datos en formato PNG á orde de impresión (de xeito predeterminado era «pngtopnm | pnmtops | lpr»).

Se estabeleceu unha alternativa printcommand no ficheiro de configuración antes da versión 0.9.15, terá que cambialo.

altprintcommand=ORDE

(Só Linux e Unix)

Usa a orde ORDE para imprimir un ficheiro en formato PostScript cando se preme no botón «Imprimir» mentres se mantén premida a tecla modificadora . (Iso utilizase normalmente para fornecer un diálogo de impresión, semellante a cando se preme [Alt]+«Imprimir» en Windows e macOS.)

Se esta opción non está especificamente definida, a orde predeterminada é o diálogo gráfico de impresión de KDE:

kprinter

printcfg=yes

(Só Windows e macOS)

Tux Paint empregará un ficheiro de configuración da impresora cando imprima. Prema a tecla [Alt] mentres preme no botón «Imprimir» en Tux Paint para que apareza unha xanela de diálogo de impresión de Windows.

(Nota: Isto só funciona cando non se está a executar Tux Paint en modo de pantalla completa.) Calquera cambio de configuración feito neste diálogo gardarase no ficheiro «userdata/print.cfg» e volverase a usar, sempre que estea configurada a opción «printcfg»

altprint=always

Isto fai que Tux Paint amose sempre o diálogo da impresora (ou, en Linux/Unix, execute a orde «altprint») cando se preme no botón «Imprimir». Noutras palabras, é como premer en «Imprimir» mentres mantén premido [Alt], agás que non precisa manter premida [Alt] cada vez.

altprint=never

Isto evita que Tux Paint nunca amose o diálogo da impresora (ou, en Linux/Unix, execute «altprintcommand») cando se preme no botón «Imprimir». Noutras palabras, fai que a tecla [Alt] non teña efecto ao premer no botón «Imprimir».

altprint=mod

Este é o comportamento normal e predeterminado. Tux Paint amosa un diálogo de impresora (ou, en Linux/Unix, executa a orde «altprint»), cando se preme a tecla [Alt] mentres se preme no botón «Imprimir». Premer en «Imprimir» sen manter premida [Alt] imprime sen amosar un diálogo.

papersize=TAMAÑO DO PAPEL

(Plataformas que usan o xerador interno PostScript de Tux Paint, non Windows, macOS, BeOS ou Haiku).

Indica a Tux Paint que tamaño de PostScript debe xerar. Se non se especifica ningún, Tux Paint comproba primeiro a súa variábel de contorno $PAPER, após o ficheiro /etc/papersize e após usa o tamaño de papel predeterminado da biblioteca «libpaper».

Os tamaños de papel válidos inclúen: letter, legal, tabloid, executive, note, statement, a0, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, b0, b1, b2 b3, b4, 10x14, 11x17, halfletter, halfexecutive, halfnote, folio, quarto, ledger, archA, archB, archC, archD, archE, flsa, flse, csheet, dsheet, esheet.

nolockfile=yes

De xeito predeterminado, Tux Paint usa o que se coñece como «ficheiro de bloqueo» para evitar que se inicie máis dunha vez en 30 segundos. (Isto é para evitar executar accidentalmente varias copias; por exemplo, premendo dúas veces nun iniciador dun só clic ou simplemente premendo impacientemente na icona varias veces.)

To make Tux Paint ignore the lockfile, allowing it to run again, even if it was just launched less than 30 seconds ago, enable this setting in the configuration file, or run Tux Paint with the --nolockfile option on the command-line.

By default, the lockfile is stored in "~/.tuxpaint/" under Linux and Unix, and "userdata\" under Windows.

simpleshapes=yes

Disable the rotation step of the 'Shape' tool. Click, drag and release is all that will be needed to draw a shape.

uppercase=yes

All text will be rendered only in uppercase (e.g., "Brush" will be "BRUSH"). Useful for children who can read, but who have only learned uppercase letters so far.

grab=yes

Tux Paint will attempt to 'grab' the mouse and keyboard, so that the mouse is confined to Tux Paint's window, and nearly all keyboard input is passed directly to it.

This is useful to disable operating system actions that could get the user out of Tux Paint [Alt]-[Tab] window cycling, [Ctrl]-[Escape], etc. This is especially useful in fullscreen mode.

noshortcuts=yes

This disable keyboard shortcuts (e.g., [Ctrl]-[S] for save, [Ctrl]-[N] for a new image, etc.)

This is useful to prevent unwanted commands from being activated by children who aren't experienced with keyboards.

nowheelmouse=yes

This disables support for the wheel on mice that have it. (Normally, the wheel will scroll the selector menu on the right.)

nobuttondistinction=yes

Prior to Tux Paint 0.9.15, the middle and right buttons on a mouse could also be used for clicking. In version 0.9.15, it was changed so that only the left mouse button worked, so as to not train children to use the wrong button.

However, for children who have trouble with the mouse, this distinction between the two or three buttons on a mouse can be disabled (returning Tux Paint to its old behavior) by using this option.

nofancycursors=yes

This disables the fancy mouse pointer shapes in Tux Paint, and uses your environment's normal mouse pointer.

In some enviornments, the fancy cursors cause problems. Use this option to avoid them.

hidecursor=yes

Isto agocha completamente as formas do punteiro do rato en Tux Paint.

Isto é útil para dispositivos con pantalla táctil, como as tabletas.

nooutlines=yes

In this mode, much simpler outlines and 'rubber-band' lines are displayed when using the Lines, Shapes, Stamps and Eraser tools.

This can help when Tux Paint is run on very slow computers, or displayed on a remote X-Window display.

sysfonts=yes

This option causes Tux Paint to attempt to load fonts (for use in the Text tool) from your operating system. Normally, Tux Paint will only load the ones that came bundled with Tux Paint.

alllocalefonts=yes

Prior to version 0.9.21, Tux Paint loaded all fonts in its own fonts directory, including locale-specific ones (e.g., the one for Tibetan, which had no latin characters). As of 0.9.21, the only font loaded from the locale-specific subdirectory, if any, is one matching the locale Tux Paint is running on.

To load all locale-specific fonts (the old behavior), set this option.

nostamps=yes

This option tells Tux Paint to not load any rubber stamp images, which in turn ends up disabling the Stamps tool.

This can speed up Tux Paint when it first loads up, and reduce memory usage while it's running. Of course, no stamps will be available at all.

nostampcontrols=yes

Some images in the Stamps tool can be mirrored, flipped, and/or have their size changed. This option disables the controls, and only provides the basic stamps.

nomagiccontrols=yes

Some Magic tools have the option of acting like a paintbrush, or affecting the entire canvas at once. This option disables the controls, and only provides the default functionality (usually paint-mode).

noshapecontrols=yes

Disable the control buttons shown when using the Shapes tool that allow changing how shapes are drawn — centered around the initial mouse click, or with a corner at the initial mouse click.

nolabel=yes

Disables the Label tool: the tool that allows text entry which can be edited later.

newcolorslast=yes

Places the blank color options in the New dialog at the end, so that any Starters and/or Templates are shown first.

mirrorstamps=yes

For stamps that can be mirrored, this option sets them to their mirrored shape by default.

This can be useful for people who prefer things right-to-left, rather than left-to-right.

mouse-accessibility=yes

In this mode, instead of clicking, dragging and releasing (e.g., to draw), you click, move, and click again to end the motion.

onscreen-keyboard=yes

Presents a clickable on-screen keyboard when using the Text and Label tools.

onscreen-keyboard-layout=NOME DA DISPOSICIÓN

Selecciona o deseño inicial para o teclado en pantalla cando usa as ferramentas Texto e Etiqueta.
Nota: Usar esta opción implica onscreen-keyboard=yes automaticamente, polo que configurar ambas as cousas é redundante .

onscreen-keyboard-disable-change=yes

Desactiva a posibilidade de cambiar o deseño do teclado en pantalla cando se usan as ferramentas Texto e Etiqueta, útil para simplificar as cousas para os nenos pequenos.
Nota: Usar esta opción implica automaticamente onscreen-keyboard=yes, polo que estabelecer ambas as cousas é redundante.

joystick-dev=N

Especifica que dispositivo de mando debe ser usado por Tux Paint. O valor predeterminado é 0 (a primeira panca de mando — joystick).

joystick-slowness=VELOCIDADE

Estabelece un atraso en cada movemento do eixo, permitindo atrasar a panca de mando (joystick). Os valores permitidos van de 0 a 500. O valor predeterminado é 15.

joystick-threshold=LIMIAR

Estabelece o nivel mínimo de movemento do eixe para comezar a mover o punteiro. Os valores permitidos son de 0 a 32766. O valor predeterminado é 3200.

joystick-maxsteps=PASOS

Define os píxeles máximos que moverá o punteiro á vez. Os valores permitidos van do 1 ao 7. O valor predeterminado é 7.

joystick-hat-timeout=MILISEGUNDOS

Establece o atraso após de que o punteiro comezará a moverse automaticamente se se mantén premido o sombreiro. Os valores permitidos van de 0 a 3000. O valor predeterminado é 1000.

joystick-hat-slowness=VELOCIDADE

Establece un atraso en cada movemento automático, o que permite diminuír a velocidade do sombreiro. Os valores permitidos van de 0 a 500. O valor predeterminado é 15.

joystick-btn-escape=NÚMERO DE BOTÓN

Selecciona o número do botón da panca de control (joystick), tal e como o ve SDL, que se usará para xerar un evento de escape. Útil para desactivar os diálogos e saír.

joystick-btn-brush=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de pinceis.

joystick-btn-stamp=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de selos.

joystick-btn-lines=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de liñas.

joystick-btn-shapes=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de formas.

joystick-btn-text=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de texto.

joystick-btn-label=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de etiquetas.

joystick-btn-magic=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a seleccionar a ferramenta de máxia.

joystick-btn-undo=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a invocar a ferramenta de desfacer.

joystick-btn-redo=NÚMERO DE BOTÓN

Selecciona o número do botón da panca de mando (joystick), tal e como o ve SDL, que será un atallo para seleccionar ferramenta de refacer.

joystick-btn-eraser=NÚMERO DE BOTÓN

Selecciona o número do botón da panca de mando (joystick), tal e como o ve SDL, que será un atallo para seleccionar Ferramenta de goma.

joystick-btn-new=NÚMERO DE BOTÓN

Selecciona o número do botón da panca de mando (joystick), como o ve SDL, que será un atallo para iniciar o diálogo para crear un novo debuxo.

joystick-btn-open=NÚMERO DE BOTÓN

Selecciona o número do botón da panca de mando (joystick), como o ve SDL, que será un atallo para iniciar o diálogo para abrir un debuxo existente.

joystick-btn-save=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a garda o debuxo.

joystick-btn-pgsetup=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a inicia o diálogo de configuración da páxina para imprimir.

joystick-btn-print=NÚMERO DE BOTÓN

Selecciona o número do botón do joystick, como o ve SDL, que será un atallo a imprimir.

joystick-buttons-ignore=BOTÓN1,BOTÓN2,...

Un conxunto de números de botóns do mando (joystick), como se ve en SDL, que deben ignorarse. Se non, a menos que sexan utilizados por unha das opcións «joystick-btn-» anteriores, os botóns veranse como un botón esquerdo do rato.

stampsize=TAMAÑO

Use esta opción para forzar a Tux Paint a estabelecer o tamaño inicial de todos os selos. O valor TAMAÑO debería estar entre 0 (máis pequeno) e 10 (máis grande). O tamaño é relativo aos tamaños dispoñíbeis do selo, que depende do selo en si, e do tamaño actual do lenzo de Tux Paint.

Especifique «default» para que Tux Paint decida (o seu comportamento estándar).

keyboard=yes

Isto permite empregar as teclas de frecha do teclado para controlar o punteiro do rato. (por exemplo, para contornos sen rato ou persoas con discapacidade ou problemas de accesibilidade)

Funcionalidades:

Movemento fino dentro do lenzo ou movemento groseiro se se mantén premida default.

Movemento groseiro dentro das áreas dos botóns da ferramenta.

Principais controis:

[Left]/[Right]/[Up]/[Down], teclado numérico [1] ata [9]: mover o rato

[Space]/[5]: premer co rato (agás cando se empregan as ferramentas de «Texto» ou de «Etiqueta»)

[Insert]/[F5]: premer co rato (sempre)

[F4] fai saltar o rato entre as «Ferramentas», «Cores» e as áreas do lenzo

Se o rato está dentro da sección «Ferramentas» á esquerda ou na sección «Cores» na parte inferior:

[F7]/[F8]: mover cara abaixo/arriba entre os botóns, respectivamente (só sección de ferramentas)

[F11]/[F12]: mover ao botón anterior/seguinte, respectivamente

Para premer e arrastrar, manteña premida unha das teclas de «clic» (p. ex.: [Insert]) e use as teclas de movemento (p. ex.: [Left]).

Nota: a función de «accesibilidade do rato» funciona cos controis do rato do teclado. Con ambas as opcións activadas, as ferramentas de pintura pódense empregar para debuxar premendo unha tecla «clic» para comezar a premer, as teclas de movemento para moverse (que debuxará) e outra tecla «clic» para deixar de premer (deixar de debuxar).

Aínda se pode usar un rato e/ou unha panca de mando (joystick) normais (para que poida, por exemplo, moverse co rato e premer co teclado ou viceversa)

savedir=DIRECTORIO

Use esta opción para cambiar onde se atopa o directorio/cartafol «saved» de Tux Paint, que é onde Tux Paint garda e abre imaxes.

Se non o anula, a ubicación predeterminada é:

Linux & Unix — Under a hidden directory named ".tuxpaint" in your home directory (aka "~" or "$HOME")
Exemplo: /home/username/.tuxpaint/saved/

Windows — Inside a folder named "TuxPaint" in your "Application Data" folder.
Exemplo: C:\Documents and Settings\Username\Application Data\TuxPaint\saved\

macOS — Inside a folder named "TuxPaint" in your "Application Support" folder.
Exemplo: /Users/Username/Library/Application Support/TuxPaint/saved/

Note: When specifying a Windows drive (e.g., "H:\"), you must also specify a subdirectory.

Note: Prior to version 0.9.18, Tux Paint would also use the setting or default for "savedir" as the place to search for personal data files (brushes, stamps, starters and fonts). As of version 0.9.18, they may be specified separately (see the "datadir" option, below).

Exemplo: savedir=Z:\tuxpaint\

exportdir=DIRECTORIO

Use this option to change where Tux Paint exports files — single images, or animated GIF slideshows — for external use.

Se non o anula, a ubicación predeterminada é:

Linux & Unix — If available, wherever your desktop environment is configured for pictures to be stored, based on your XDG (X Desktop Group) configuration. (Try running the command-line "xdg-user-dir PICTURES" to find out.)
Typically (in an English locale), this will be a "Imaxes" subdirectory in your home directory (i.e., "$HOME/Imaxes" aka "~/Imaxes").
Tux Paint will fall back to using that typical directory, of no XDG configuration can be read, or nothing is set for "XDG_PICTURES_DIR".

Windows — TBD!

macOS — TBD!

Note: When the defaults are used, a new "TuxPaint" subdirectory will be created and used. (e.g., "~/Imaxes/TuxPaint") When the "--exportdir" option is used, the exact path specified will be used (no "TuxPaint" subdirectory is created).

The directory itself (e.g., "~/Imaxes/TuxPaint") will be created, if it doesn't exist.

If the parent directory (e.g., "~/Imaxes/TuxPaint") also does not exist, Tux Paint will attempt to create it as well (but not any directories higher than that).

Exemplo: exportdir=/home/penguin/TuxPaintExports

datadir=DIRECTORIO

Use this option to change where Tux Paint looks for personal data files (brushes, stamps, starters, templates, and fonts specific to the current user).

Tux Paint will search for subdirectories/subfolders named "brushes", "stamps", "starters", "templates", and "fonts" under the specified data directory.

Se non o anula, a ubicación predeterminada é:

Linux & Unix — Under a hidden directory named ".tuxpaint" in your home directory (aka "~" or "$HOME")
Exemplo: /home/username/.tuxpaint/brushes/

Windows — Inside a folder named "TuxPaint" in your "Application Data" folder.
Exemplo: C:\Documents and Settings\Username\Application Data\TuxPaint\brushes\

macOS — Inside a folder named "TuxPaint" in your "Application Support" folder.
Exemplo: /Users/Username/Library/Application Support/TuxPaint/brushes/

Note: Prior to version 0.9.18, Tux Paint would use the same setting or default as for "savedir" to search for data files. As of version 0.9.18, they may be specified separately.

Note: When specifying a Windows drive (e.g., "H:\"), you must also specify a subdirectory.

Exemplo: datadir=/home/johnny/tuxpaint-data/

saveover=yes

This disables the "Save over the old version...?" prompt when saving an existing file. With this option, the older version will always be replaced by the new version, automatically.

saveover=new

This also disables the "Save over the old version...?" prompt when saving an existing file. This option, however, will always save a new file, rather than overwrite the older version.

saveover=ask

(This option is redundant, since this is the default.)
When saving an existing drawing, you will be first asked whether to save over the older version or not.

nosave=yes

This disables Tux Paint's ability to save files (and therefore disables the on-screen "Save" button). It can be used in situations where the program is only being used for fun, or in a test environment.

autosave=yes

This prevents Tux Paint from asking whether you want to save the current picture when quitting, and assumes you do.

startblank=yes

This causes Tux Paint to display a blank canvas when it first starts up, rather than loading the last image that was being edited.

colorfile=NOME DE FICHEIRO

You may override Tux Paint's default color palette by creating a plain ASCII text file that describes the colors you want, and pointing to that file using the "colorfile" option.

The file should list one color per line. Colors are defined in terms of their Red, Green and Blue values, each from 0 (off) to 255 (brightest). (For more information, try Wikipedia's "RGB color model" article.)

Colors may be listed using three decimal numbers (e.g., "255 68 136") or a 6- or 3-digit-long hexadecimal 'triplet' (e.g., "#ff4488" or "#F48").

After the color definition (on the same line) you may enter text to describe the color. Tux will display this text when the color is clicked. (For example, "#FFF Branco coma a neve.")

As an example, you can see the default colors currently used in Tux Paint in: "default_colors.txt".

NOTES: You must separate decimal values with spaces, and begin hexadecimal values with a pound/number-sign character ("#"). In 3-digit hexadecimal, each digit is used for both the high and low halves of the byte, so "#FFF" is the same as "#FFFFFF", not "#F0F0F0".

colorsrows=ROWS

How many rows of color palette buttons to show; useful when using a large color palette (see "colorfile", above), and/or for use with coarse input devices (like eyegaze trackers). "ROWS" may be between "1" (the default) and "3".

lang=IDIOMA

Run Tux Paint in one of the supported languages. Possible choice for LANGUAGE currently include:

english american-english

acholi acoli

afrikaans

akan twi-fante

albanian

amharic

arabic

aragones

armenian hayeren

assamese

asturian

australian-english

azerbaijani

bambara

basque euskara

belarusian bielaruskaja

bengali

bodo

bokmal

bosnian

brazilian-portuguese portugues-brazilian brazilian

breton brezhoneg

british-english british

bulgarian

canadian-english

catalan catala

chinese simplified-chinese

croatian hrvatski

czech cesky

danish dansk

dogri

dutch nederlands

esperanto

estonian

faroese

finnish suomi

french francais

fula fulah pulaar-fulfulde

gaelic gaidhlig irish-gaelic

galician galego

georgian

german deutsch

greek

gronings zudelk-veenkelonioals

gujarati

hebrew

hindi

hungarian magyar

icelandic islenska

indonesian bahasa-indonesia

inuktitut

italian italiano

japanese

kabyle kabylian

kannada

kashmiri-devanagari

kashmiri-perso-arabic

khmer

kiga chiga

kinyarwanda

klingon tlhIngan

konkani-devanagari

konkani-roman

korean

kurdish

latvian

lithuanian lietuviu

luganda

luxembourgish letzebuergesch

macedonian

maithili

malay

malayalam

manipuri-bengali

manipuri-meitei-mayek

marathi

mexican-spanish espanol-mejicano mexican

mongolian

ndebele

nepali

northern-sotho sesotho-sa-leboa

norwegian nynorsk norsk

occitan

odia oriya

ojibwe ojibway

persian

polish polski

portuguese portugues

punjabi panjabi

romanian

russian russkiy

sanskrit

santali-devanagari

santali-ol-chiki

scottish ghaidhlig scottish-gaelic

serbian

serbian-latin

shuswap secwepemctin

sindhi-devanagari

sindhi-perso-arabic

slovak

slovenian slovensko

songhay

southafrican-english

spanish espanol

sundanese

swahili

swedish svenska

tagalog

tamil

telugu

thai

tibetan

traditional-chinese

turkish

twi

ukrainian

urdu

venda

venetian veneto

vietnamese

walloon walon

welsh cymraeg

wolof

xhosa

miahuatlan-zapotec zapotec

zulu zulu

Anulación da configuración do sistema. Opcións

(Para usuarios de Linux e Unix)

If any of the above options are set in "/etc/tuxpaint/tuxpaint.config", you can override them in your own "~/.tuxpaintrc" file.

For true/false options, like "noprint" and "grab", you can simply say they equal 'no' in your "~/.tuxpaintrc" file:

noprint=no uppercase=no

Or, you can use options similar to the command-line override options described below. For example:

print=yes mixedcase=yes

Opcións da liña de ordes

As opcións tamén se poden emitir na liña de ordes cando se inicia Tux Paint.

--fullscreen --LARGOxALTO --orient=portrait --native --allowscreensaver --startblank --nosound --nostereo --noquit --noprint --printdelay=SEGUNDOS --printcfg --altprintnever --altprintalways --papersize=TAMAÑO DO PAPEL --nolockfile --simpleshapes --uppercase --grab --noshortcuts --nowheelmouse --nobuttondistinction --nofancycursors --hidecursor --nooutlines --nostamps --nostampcontrols --nomagiccontrols --noshapecontrols --nolabel --newcolorslast --mouse-accessibility --onscreen-keyboard --onscreen-keyboard-layout --onscreen-keyboard-disable-change --joystick-dev --joystick-slowness --joystick-threshold --joystick-maxsteps --joystick-hat-slowness --joystick-hat-timeout --joystick-btn-escape --joystick-btn-brush --joystick-btn-stamp --joystick-btn-lines --joystick-btn-shapes --joystick-btn-text --joystick-btn-label --joystick-btn-magic --joystick-btn-undo --joystick-btn-redo --joystick-btn-eraser --joystick-btn-new --joystick-btn-open --joystick-btn-save --joystick-btn-pgsetup --joystick-btn-print --joystick-buttons-ignore --sysfonts --alllocalefonts --mirrorstamps --stampsize=TAMAÑO --keyboard --savedir DIRECTORIO --datadir DIRECTORIO --exportdir DIRECTORIO --saveover --saveovernew --nosave --autosave --lang IDIOMA --colorfile FICHEIRO

These enable or correspond to the configuration file options described above.

--windowed --800x600 --orient=landscape --disablescreensaver --startlast --sound --stereo --quit --print --printdelay=0 --noprintcfg --altprintmod --lockfile --complexshapes --mixedcase --dontgrab --shortcuts --wheelmouse --buttondistinction --fancycursors --showcursor --outlines --stamps --stampcontrols --magiccontrols --shapecontrols --label --newcolorsfirst --nosysfonts --currentlocalefont --dontmirrorstamps --stampsize=default --mouse --saveoverask --save --noautosave

These options can be used to override any settings made in the configuration file. (If the option isn't set in the configuration file(s), no overriding option is necessary.)

--locale CONF. REXIONAL

Run Tux Paint in one of the support languages. See the "Choosing a Different Language" section below for the locale strings (e.g., "de_DE" for German) to use.

(If your locale is already set, e.g. with the "$LANG" environment variable, this option is not necessary, since Tux Paint honors your environment's setting, if possible.)

--nosysconfig

Under Linux and Unix, this prevents the system-wide configuration file, "/etc/tuxpaint/tuxpaint.conf", from being read.

Only your own configuration file, "~/.tuxpaintrc", if it exists, will be used.

Command-Line Informational Options

The following options display some informative text on the screen. Tux Paint doesn't actually start up and run afterwards, however.

--version
--verbose-version

Display the version number and date of the copy of Tux Paint you are running. The "--verbose-version" also lists what compile-time options were set. (See INSTALL and FAQ).

--copying

Show brief license information about copying Tux Paint.

--usage

Display the list of available command-line options.

--help

Display brief help on using Tux Paint.

--lang help

Display a list of available languages in Tux Paint.

--joystick-dev list

Display list of attached joysticks available to Tux Paint.

Choosing a Different Language

Tux Paint has been translated into a number of languages. To access the translations, you can use the "--lang" option on the command-line to set the language (e.g. "--lang spanish") or use the "lang=" setting in the configuration file (e.g., "lang=spanish").

Tux Paint also honors your environment's current locale. (You can override it on the command-line using the "--locale" option; see above.)

Use the option "--lang help" to list the available language options available.

Idiomas dispoñíbeis

Código rexional Idioma
(nome nativo) Idioma
(nome en inglés) Combinación de teclas de ciclo de método de entrada

C English

ach_UG Acoli Acholi

af_ZA Afrikaans

ak_GH Akan

am_ET Amharic

an_ES Aragones

ar_SA Arabic

as_IN Assamese

ast_ES Asturian

az_AZ Azerbaijani

bm_ML Bambara

bn_IN Bengali

be_BY Bielaruskaja Belarusian

bg_BG Bulgarian

bo_CN (*) Tibetan

br_FR Brezhoneg Breton

brx_IN Bodo

bs_BA Bosnian

ca_ES Català Catalan

ca_ES@valencia Valencia Valencian

cgg_UG Chiga Kiga

cs_CZ Cesky Czech

cy_GB Cymraeg Welsh

da_DK Dansk Danish

de_DE Deutsch German

doi_IN Dogri

et_EE Estonian

el_GR (*) Greek

en_AU Australian English

en_CA Canadian English

en_GB British English

en_ZA South African English

eo Esperanto

es_ES Español Spanish

es_MX Español-Mejicano Mexican Spanish

eu_ES Euskara Basque

fa_IR Persian

ff_SN Fulah Fula

fi_FI Suomi Finnish

fo_FO Faroese

fr_FR Français French

ga_IE Gàidhlig Irish Gaelic

gd_GB Ghaidhlig Scottish Gaelic

gl_ES Galego Galician

gos_NL Zudelk Veenkelonioals Gronings

gu_IN Gujarati

he_IL (*) Hebrew

hi_IN (*) Hindi

hr_HR Hrvatski Croatian

hu_HU Magyar Hungarian

hy_AM Hayeren Armenian

id_ID Bahasa Indonesia Indonesian

is_IS Íslenska Icelandic

it_IT Italiano Italian

iu_CA Inuktitut

ja_JP (*) Japanese right [Alt]

ka_GE Georgian

kab Kabyle

km_KH Khmer

kn_IN Kannada

ko_KR (*) Korean right [Alt] or left [Alt]

kok_IN Konkani (Devanagari)

kok@roman Konkani (Roman)

ks_IN@devanagari Kashmiri (Devanagari)

ks_IN Kashmiri (Perso-Arabic)

ku_TR Kurdish

lb_LU Letzebuergesch Luxembourgish

lg_UG Luganda

lt_LT Lietuviu Lithuanian

lv_LV Latvian

mk_MK Macedonian

mai_IN Maithili

ml_IN Malayalam

mn_MN Mongolian

mni_IN Manipuri (Bengali)

mni@meiteimayek Manipuri (Meitei Mayek)

mr_IN Marathi

ms_MY Malay

nb_NO Norsk (bokmål) Norwegian Bokmål

ne_NP Nepali

nl_NL Dutch

nn_NO Norsk (nynorsk) Norwegian Nynorsk

nr_ZA Ndebele

nso_ZA Sesotho sa Leboa Northern Sotho

oc_FR Occitan

oj_CA Ojibwe Ojibway

pa_IN Punjabi

or_IN Odia Oriya

pl_PL Polski Polish

pt_BR Portugês Brazileiro Brazilian Portuguese

pt_PT Portugês Portuguese

ro_RO Romanian

ru_RU Russkiy Russian

rw_RW Kinyarwanda

sa_IN Sanskrit

sat_IN Santali (Devanagari)

sat@olchiki Santali (Ol-Chikii)

shs_CA Secwepemctin Shuswap

si_LK Sinhala

sd_IN@devanagari Sindhi (Devanagari)

sd_IN Sindhi

sk_SK Slovak

sl_SI Slovenian

son Songhay

sq_AL Albanian

sr_YU Serbian (cyrillic)

sr_RS@latin Serbian (latin)

su_ID Sundanese

sv_SE Svenska Swedish

sw_TZ Swahili

ta_IN (*) Tamil

te_IN (*) Telugu

th_TH (*) Thai

tl_PH (*) Tagalog

tlh tlhIngan Klingon

tr_TR Turkish

tw_GH Twi

uk_UA Ukrainian

ur_IN Urdu

ve_ZA Venda

vec Venèto Venetian

vi_VN Vietnamese

wa_BE Walloon

wo_SN Wolof

xh_ZA Xhosa

zh_CN (*) Chinese (Simplified)

zh_TW (*) Chinese (Traditional)

zam Zapotec (Miahuatlan)

zu_ZA Zulu

(*) - These languages require their own fonts, since they are not represented using a Latin character set, like the others. See the "Special Fonts" section, below.

Note: Tux Paint provides an alternative input method for entering characters with the Text tool in some locales. The key comibation(s) listed can be used to cycle through the supported input methods while the Text tool is active.

Axustando a configuración rexional do seu contorno

Cambiar a súa configuración rexional afectará a gran parte do seu contorno.

As stated above, along with letting you choose the language at runtime using command-line options ("--lang" and "--locale"), Tux Paint honors the global locale setting in your environment.

If you haven't already set your environment's locale, the following will briefly explain how:

Usuarios de Linux/Unix

First, be sure the locale you want to use is enabled by editing the file "/etc/locale.gen" on your system and then running the program "locale-gen" as root.

Note: Debian users may be able to simply run the command "dpkg-reconfigure locales" as root to bring up a configuration dialog. Ubuntu users may be able to run "sudo dpkg-reconfigure localeconf" (the "localeconf" package may need to be installed first), or you may need to edit the file "/var/lib/locales/supported.d/local" first, and add locales they want, from the list found in "/usr/share/i18n/SUPPORTED".

Then, before running Tux Paint, set your "$LANG" environment variable to one of the locales listed above. (If you want all programs that can be translated to be, you may wish to place the following in your login script; e.g. "~/.profile", "~/.bashrc", "~/.cshrc", etc.)

Por exemplo, nunha consola Bourne (como BASH):

export LANG=es_ES ; \ tuxpaint

E nunha consola C (como TCSH):

setenv LANG es_ES ; \ tuxpaint

Usuarios de Windows

Tux Paint will recognize the current locale and use the appropriate files by default. So this section is only for people trying different languages.

The simplest thing to do is to use the "--lang" switch in the shortcut (see "INSTALL"). However, by using an MSDOS Prompt window, it is also possible to issue a command like this:

set LANG=es_ES

...which will set the language for the lifetime of that DOS window.

For something more permanent, try editing your computer's "autoexec.bat" file using Windows' "sysedit" tool:

Tipos de letra especiais

Some languages require special fonts be installed. These font files (which are in TrueType format (TTF)), are much too large to include with the Tux Paint download, and are available separately. (See the table above, under the "Choosing a Different Language" section.)

Note: As of version 0.9.18, Tux Paint uses the "SDL_Pango" library, which utilizes the "Pango" library to render text in the user interface, rather than using "SDL_ttf" directly. Unless your copy of Tux Paint was built without Pango support, special fonts should no longer be necessary.

When running Tux Paint in a language that requires its own font, Tux Paint will try to load the font file from its system-wide "fonts" directory (under a "locale" subdirectory). The name of the file corresponds to the first two letters in the 'locale' code of the language (e.g., "ko" for Korean, "ja" for Japanese, "zh_tw" for Traditional Chinese).

For example, under Linux or Unix, when Tux Paint is run in Korean (e.g., with the option "--lang korean"), Tux Paint will attempt to load the following font file:

/usr/share/tuxpaint/fonts/locale/ko.ttf

You can download fonts for supported languages from Tux Paint's website, http://www.tuxpaint.org/. (Look in the 'Fonts' section under 'Download.')

Under Unix and Linux, you can use the Makefile that comes with the font to install the font in the appropriate location.

`english`	`american-english`
`acholi`	`acoli`
`afrikaans`
`akan`	`twi-fante`
`albanian`
`amharic`
`arabic`
`aragones`
`armenian`	`hayeren`
`assamese`
`asturian`
`australian-english`
`azerbaijani`
`bambara`
`basque`	`euskara`
`belarusian`	`bielaruskaja`
`bengali`
`bodo`
`bokmal`
`bosnian`
`brazilian-portuguese`	`portugues-brazilian`	`brazilian`
`breton`	`brezhoneg`
`british-english`	`british`
`bulgarian`
`canadian-english`
`catalan`	`catala`
`chinese`	`simplified-chinese`
`croatian`	`hrvatski`
`czech`	`cesky`
`danish`	`dansk`
	`dogri`
`dutch`	`nederlands`
`esperanto`
`estonian`
`faroese`
`finnish`	`suomi`
`french`	`francais`
`fula`	`fulah`	`pulaar-fulfulde`
`gaelic`	`gaidhlig`	`irish-gaelic`
`galician`	`galego`
`georgian`
`german`	`deutsch`
`greek`
`gronings`	`zudelk-veenkelonioals`
`gujarati`
`hebrew`
`hindi`
`hungarian`	`magyar`
`icelandic`	`islenska`
`indonesian`	`bahasa-indonesia`
`inuktitut`
`italian`	`italiano`
`japanese`
`kabyle`		`kabylian`
`kannada`
`kashmiri-devanagari`
`kashmiri-perso-arabic`
`khmer`
`kiga`	`chiga`
`kinyarwanda`
`klingon`	`tlhIngan`
`konkani-devanagari`
`konkani-roman`
`korean`
`kurdish`
`latvian`
`lithuanian`	`lietuviu`
`luganda`
`luxembourgish`	`letzebuergesch`
`macedonian`
`maithili`
`malay`
`malayalam`
`manipuri-bengali`
`manipuri-meitei-mayek`
`marathi`
`mexican-spanish`	`espanol-mejicano`	`mexican`
`mongolian`
`ndebele`
`nepali`
`northern-sotho`	`sesotho-sa-leboa`
`norwegian`	`nynorsk`	`norsk`
`occitan`
`odia`	`oriya`
`ojibwe`	`ojibway`
`persian`
`polish`	`polski`
`portuguese`	`portugues`
`punjabi`	`panjabi`
`romanian`
`russian`	`russkiy`
`sanskrit`
`santali-devanagari`
`santali-ol-chiki`
`scottish`	`ghaidhlig`	`scottish-gaelic`
`serbian`
`serbian-latin`
`shuswap`	`secwepemctin`
`sindhi-devanagari`
`sindhi-perso-arabic`
`slovak`
`slovenian`	`slovensko`
`songhay`
`southafrican-english`
`spanish`	`espanol`
`sundanese`
`swahili`
`swedish`	`svenska`
`tagalog`
`tamil`
`telugu`
`thai`
`tibetan`
`traditional-chinese`
`turkish`
`twi`
`ukrainian`
`urdu`
`venda`
`venetian`	`veneto`
`vietnamese`
`walloon`	`walon`
`welsh`	`cymraeg`
`wolof`
`xhosa`
`miahuatlan-zapotec`		`zapotec`
`zulu`		`zulu`

Código rexional	Idioma (nome nativo)	Idioma (nome en inglés)	Combinación de teclas de ciclo de método de entrada
`C`		English
`ach_UG`	Acoli	Acholi
`af_ZA`		Afrikaans
`ak_GH`		Akan
`am_ET`		Amharic
`an_ES`		Aragones
`ar_SA`		Arabic
`as_IN`		Assamese
`ast_ES`		Asturian
`az_AZ`		Azerbaijani
`bm_ML`		Bambara
`bn_IN`		Bengali
`be_BY`	Bielaruskaja	Belarusian
`bg_BG`		Bulgarian
`bo_CN` (*)		Tibetan
`br_FR`	Brezhoneg	Breton
`brx_IN`		Bodo
`bs_BA`		Bosnian
`ca_ES`	Català	Catalan
`ca_ES@valencia`	Valencia	Valencian
`cgg_UG`	Chiga	Kiga
`cs_CZ`	Cesky	Czech
`cy_GB`	Cymraeg	Welsh
`da_DK`	Dansk	Danish
`de_DE`	Deutsch	German
`doi_IN`		Dogri
`et_EE`		Estonian
`el_GR` (*)		Greek
`en_AU`		Australian English
`en_CA`		Canadian English
`en_GB`		British English
`en_ZA`		South African English
`eo`		Esperanto
`es_ES`	Español	Spanish
`es_MX`	Español-Mejicano	Mexican Spanish
`eu_ES`	Euskara	Basque
`fa_IR`		Persian
`ff_SN`	Fulah	Fula
`fi_FI`	Suomi	Finnish
`fo_FO`		Faroese
`fr_FR`	Français	French
`ga_IE`	Gàidhlig	Irish Gaelic
`gd_GB`	Ghaidhlig	Scottish Gaelic
`gl_ES`	Galego	Galician
`gos_NL`	Zudelk Veenkelonioals	Gronings
`gu_IN`		Gujarati
`he_IL` (*)		Hebrew
`hi_IN` (*)		Hindi
`hr_HR`	Hrvatski	Croatian
`hu_HU`	Magyar	Hungarian
`hy_AM`	Hayeren	Armenian
`id_ID`	Bahasa Indonesia	Indonesian
`is_IS`	Íslenska	Icelandic
`it_IT`	Italiano	Italian
`iu_CA`		Inuktitut
`ja_JP` (*)		Japanese	right [Alt]
`ka_GE`		Georgian
`kab`		Kabyle
`km_KH`		Khmer
`kn_IN`		Kannada
`ko_KR` (*)		Korean	right [Alt] or left [Alt]
`kok_IN`		Konkani (Devanagari)
`kok@roman`		Konkani (Roman)
`ks_IN@devanagari`		Kashmiri (Devanagari)
`ks_IN`		Kashmiri (Perso-Arabic)
`ku_TR`		Kurdish
`lb_LU`	Letzebuergesch	Luxembourgish
`lg_UG`		Luganda
`lt_LT`	Lietuviu	Lithuanian
`lv_LV`		Latvian
`mk_MK`		Macedonian
`mai_IN`		Maithili
`ml_IN`		Malayalam
`mn_MN`		Mongolian
`mni_IN`		Manipuri (Bengali)
`mni@meiteimayek`		Manipuri (Meitei Mayek)
`mr_IN`		Marathi
`ms_MY`		Malay
`nb_NO`	Norsk (bokmål)	Norwegian Bokmål
`ne_NP`	Nepali
`nl_NL`		Dutch
`nn_NO`	Norsk (nynorsk)	Norwegian Nynorsk
`nr_ZA`		Ndebele
`nso_ZA`	Sesotho sa Leboa	Northern Sotho
`oc_FR`		Occitan
`oj_CA`		Ojibwe	Ojibway
`pa_IN`		Punjabi
`or_IN`		Odia	Oriya
`pl_PL`	Polski	Polish
`pt_BR`	Portugês Brazileiro	Brazilian Portuguese
`pt_PT`	Portugês	Portuguese
`ro_RO`		Romanian
`ru_RU`	Russkiy	Russian
`rw_RW`		Kinyarwanda
`sa_IN`		Sanskrit
`sat_IN`		Santali (Devanagari)
`sat@olchiki`		Santali (Ol-Chikii)
`shs_CA`	Secwepemctin	Shuswap
`si_LK`		Sinhala
`sd_IN@devanagari`		Sindhi (Devanagari)
`sd_IN`		Sindhi
`sk_SK`		Slovak
`sl_SI`		Slovenian
`son`		Songhay
`sq_AL`		Albanian
`sr_YU`		Serbian (cyrillic)
`sr_RS@latin`		Serbian (latin)
`su_ID`		Sundanese
`sv_SE`	Svenska	Swedish
`sw_TZ`		Swahili
`ta_IN` (*)		Tamil
`te_IN` (*)		Telugu
`th_TH` (*)		Thai
`tl_PH` (*)		Tagalog
`tlh`	tlhIngan	Klingon
`tr_TR`		Turkish
`tw_GH`		Twi
`uk_UA`		Ukrainian
`ur_IN`		Urdu
`ve_ZA`		Venda
`vec`	Venèto	Venetian
`vi_VN`		Vietnamese
`wa_BE`		Walloon
`wo_SN`		Wolof
`xh_ZA`		Xhosa
`zh_CN` (*)		Chinese (Simplified)
`zh_TW` (*)		Chinese (Traditional)
`zam`		Zapotec (Miahuatlan)
`zu_ZA`		Zulu

Tux Paint versión 0.9.26

Documentación de opcións

Tux Paint Config.

Ficheiro de configuración

Usuarios de Linux e Unix

Ficheiro de configuración de todo o sistema

Usuarios de macOS

Ficheiro de configuración de todo o sistema

Usuarios de Windows

Opcións dispoñíbeis

Anulación da configuración do sistema. Opcións

Opcións da liña de ordes

Command-Line Informational Options

Choosing a Different Language

Idiomas dispoñíbeis

Axustando a configuración rexional do seu contorno

Usuarios de Linux/Unix

Usuarios de Windows

Tipos de letra especiais

Tux Paint
versión 0.9.26