notgne2/tuxpaint-pencil-sharpener
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Ran English HTML docs through HTML Tidy

Browse source 
See "RELEASE.txt" for the invocation.  Mended a few things prior
to final run of `tidy`, based on HTML Tidy's output.

Updated any affected TXT files via Makefile.
This commit is contained in:
Bill Kendrick 2020-07-27 23:01:06 -07:00
parent b93317efae
commit cbb56c4041
10 changed files with 11670 additions and 6917 deletions
Download patch file Download diff file Expand all files Collapse all files

4
docs/CHANGES.txt
View file

@ -36,6 +36,10 @@ $Id$
(Ref: https://github.com/haikuports/haikuports/issues/3045) (Ref: https://github.com/haikuports/haikuports/issues/3045)
Gerasim Troeglazov <3dEyes@gmail.com> Gerasim Troeglazov <3dEyes@gmail.com>
* Documentation updates
---------------------
* Cleaned up HTML code of HTML-based documentation.
* Bug Fixes * Bug Fixes
--------- ---------
* Mended issue where stamp descriptions were not loading * Mended issue where stamp descriptions were not loading

2
docs/en/EXTENDING.txt
View file

@ -5,7 +5,7 @@
Copyright (c) 2002-2020 by various contributors; see AUTHORS.txt Copyright (c) 2002-2020 by various contributors; see AUTHORS.txt
http://www.tuxpaint.org/ http://www.tuxpaint.org/
June 14, 2002 - June 22, 2020 June 14, 2002 - July 27, 2020
---------------------------------------------------------------------- ----------------------------------------------------------------------

16
docs/en/FAQ.txt
View file

@ -44,13 +44,13 @@ Drawing-related
* The Magic "Fill" Tool Looks Bad * The Magic "Fill" Tool Looks Bad
Tux Paint is probably comparing exact pixel colors when filling. Tux Paint is probably comparing exact pixel colors when filling. This
This is faster, but looks worse. Run the command is faster, but looks worse. Run the command "tuxpaint --version" from
"tuxpaint --version" from a command line, and you should see, a command line, and you should see, amongst the other output: "Low
amongst the other output: "Low Quality Flood Fill enabled". Quality Flood Fill enabled".
To change this, you must rebuild Tux Paint from source. Be sure To change this, you must rebuild Tux Paint from source. Be sure to
to remove or comment out any line that says: remove or comment out any line that says:
#define LOW_QUALITY_FLOOD_FILL #define LOW_QUALITY_FLOOD_FILL
@ -60,8 +60,8 @@ Drawing-related
Tux Paint was built with low-quality (but faster) stamp outlines. Tux Paint was built with low-quality (but faster) stamp outlines.
Rebuild Tux Paint from source. Be sure to remove or comment out Rebuild Tux Paint from source. Be sure to remove or comment out any
any line that says: line that says:
#define LOW_QUALITY_STAMP_OUTLINE #define LOW_QUALITY_STAMP_OUTLINE

727
docs/en/OPTIONS.txt
View file

File diff suppressed because it is too large Load diff

13
docs/en/README.txt
View file

@ -147,8 +147,8 @@ Main Screen
The toolbar contains the drawing and editing controls. The toolbar contains the drawing and editing controls.
[Tools: Paint, Stamp, Lines, Shapes, Text, Magic, Label, Undo, Redo, [Tools: Paint, Stamp, Lines, Shapes, Text, Magic, Label, Undo, Redo, Eraser,
Eraser, New, Open, Save, Print, Quit] New, Open, Save, Print, Quit]
Middle: Drawing Canvas Middle: Drawing Canvas
@ -176,8 +176,8 @@ Main Screen
A palette of available colors are shown near the bottom of the A palette of available colors are shown near the bottom of the
screen. screen.
[Colors - Black, White, Red, Pink, Orange, Yellow, Green, Cyan, Blue, [Colors - Black, White, Red, Pink, Orange, Yellow, Green, Cyan, Blue, Purple,
Purple, Brown, Grey] Brown, Grey]
On the far right are two special color options, the On the far right are two special color options, the
"color picker", which has an outline of an eye-dropper, and "color picker", which has an outline of an eye-dropper, and
@ -193,9 +193,8 @@ Main Screen
At the very bottom of the screen, Tux, the Linux Penguin, At the very bottom of the screen, Tux, the Linux Penguin,
provides tips and other information while you draw. provides tips and other information while you draw.
(For example: 'Pick a shape. Click to pick the center, drag, then let go (For example: 'Pick a shape. Click to pick the center, drag, then let go when it
when it is the size you want. Move around to rotate it, and click to draw is the size you want. Move around to rotate it, and click to draw it.)
it.)
---------------------------------------------------------------------- ----------------------------------------------------------------------

749
docs/en/html/ADVANCED-STAMPS-HOWTO.html
View file

@ -1,330 +1,501 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html><head><title>Tux Paint Advanced Stamps HOWTO</title> <html>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii"> <head>
</head> <meta name="generator"
content="HTML Tidy for HTML5 for Linux version 5.6.0">
<title>
Tux Paint Advanced Stamps HOWTO
</title>
<meta http-equiv="Content-Type"
content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF"
text="#000000"
link="#0000FF"
vlink="#FF0000"
alink="#FF00FF">
<center>
<h1>
<img src="../../html/images/tuxpaint-title.png"
width="205"
height="210"
alt="Tux&nbsp;Paint"><br>
version 0.9.25<br>
Advanced Stamps HOWTO
</h1>
<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#FF0000" <p>
alink="#FF00FF"> Copyright 2006-2008 by Albert Cahalan for the Tux Paint
project<br>
New Breed Software
</p>
<center> <p>
<h1><img src="../../html/images/tuxpaint-title.png" width=205 height=210 <a href=
alt="Tux&nbsp;Paint"><br> "mailto:albert@users.sf.net">albert@users.sf.net</a><br>
version <a href=
"http://www.tuxpaint.org/">http://www.tuxpaint.org/</a>
</p>
</center>
0.9.25 <h2>
About this HOWTO
<br> </h2>
Advanced Stamps HOWTO</h1>
<p>Copyright 2006-2008 by Albert Cahalan for the Tux Paint project<br>
New Breed Software</p>
<p><a href="mailto:albert@users.sf.net">albert@users.sf.net</a><br>
<a href="http://www.tuxpaint.org/">http://www.tuxpaint.org/</a></p>
</center>
<h2>About this HOWTO</h2>
<blockquote>
<p>This HOWTO assumes that you want to make an excellent Tux&nbsp;Paint
stamp, in PNG bitmapped format, from a JPEG image (e.g., a digital
photograph). There are easier and faster methods that
produce lower quality.</p>
<p>This HOWTO assumes you are dealing with normal opaque objects. Dealing
with semi-transparent objects (fire, moving fan blade, kid's baloon)
or light-giving objects (fire, lightbulb, sun) is best done with custom
software. Images with perfect solid-color backgrounds are also best done
with custom software, but are not troublesome to do as follows.</p>
</blockquote>
<h2>Image choice is crucial</h2>
<blockquote>
<h3>License</h3>
<blockquote>
<p>If you wish to submit artwork to the Tux&nbsp;Paint developers for
consideration for inclusion in the official project, or if you wish to
release your own copy of Tux&nbsp;Paint, bundled with your own graphics,
you need an image that is compatible with the GNU
<a href="../COPYING.txt">General Public License</a> used by
Tux&nbsp;Paint.</p>
<p>Images produced by the US government are Public Domain, but be aware
that the US government sometimes uses other images on the web.
<a href="http://images.google.com/">Google image</a> queries including
either <code>site:gov</code> or <code>site:mil</code> will supply many
suitable images. (Note: the *.mil sites include non-military content,
too!)</p>
Your own images can be placed in the Public&nbsp;Domain by declaring it
so. (Hire a lawyer if you feel the need for legal advice.)</p>
<p>For personal use, any image you can legitimately modify and use
for your own personal use should be fine.</p>
</blockquote>
<h3>Image Size and Orientation:</h3>
<blockquote>
<p>You need an image that has a useful orientation. Perspective is
an enemy. Images that show an object from the corner are difficult to
fit into a nice drawing. As a general rule, telephoto side views are
the best. The impossible ideal is that, for example, two wheels of a
car are perfectly hidden behind the other two.</p>
<p>Rotating an image can make it blurry, especially if you only rotate by
a few degrees. Images that don't need rotation are best, images that need
lots of rotation (30 to 60 degrees) are next best, and images that need
just a few degrees are worst. Rotation will also make an image darker
because most image editing software is very bad about gamma handling.
(Rotation is only legitimate for gamma=1.0 images.)</p>
<p>Very large images are more forgiving of mistakes, and thus easier to
work with. Choose an image with an object that is over 1000 pixels
across if you can. You can shrink this later to hide your mistakes.</p>
<p>Be sure that the image is not too grainy, dim, or washed out.</p>
<p>Pay attention to feet and wheels. If they are buried in something,
you will need to draw new ones. If only one is buried, you might be
able to copy the other one as a replacement.</p>
</blockquote>
</blockquote>
<h2>Prepare the image:</h2>
<blockquote>
<p>First of all, be sure to avoid re-saving the image as a JPEG. This causes
quality loss. There is a special tool called
<a href="http://gnuwin32.sourceforge.net/packages/jpeg.htm">jpegtran</a>
that lets you crop an image without the normal quality loss. If you want a
GUI for it, use
<a href="http://astron.berkeley.edu/~mperrin/software/ljcrop/">ljcrop</a>.
Otherwise, use it like this:</p>
<blockquote> <blockquote>
<p><code>jpegtran -trim -copy none -crop 512x1728+160+128 &lt; src.jpg <p>
&gt; cropped.jpg</code></p> This HOWTO assumes that you want to make an excellent
Tux&nbsp;Paint stamp, in PNG bitmapped format, from a JPEG
image (e.g., a digital photograph). There are easier and
faster methods that produce lower quality.
</p>
<p>
This HOWTO assumes you are dealing with normal opaque
objects. Dealing with semi-transparent objects (fire,
moving fan blade, kid's baloon) or light-giving objects
(fire, lightbulb, sun) is best done with custom software.
Images with perfect solid-color backgrounds are also best
done with custom software, but are not troublesome to do as
follows.
</p>
</blockquote> </blockquote>
<p>Bring that image up in your image editor. If you didn't crop it yet, <h2>
you may find that your image editor is very slow. Rotate and crop the Image choice is crucial
image as needed. Save the image &mdash; choose whatever native format </h2>
supports layers, masks, alpha, etc. <a href="http://www.gimp.org/">GIMP</a>
users should choose "XCF", and Adobe Photoshop users should choose "PSD",
for example.</p>
<p>If you have rotated or cropped the image in your image editor, flatten <blockquote>
it now. You need to have just one RGB layer <i>without mask or <h3>
alpha</i>.</p> License
</h3>
<p>Open the layers dialog box. Replicate the one layer several times. <blockquote>
From top to bottom you will need something like this:</p> <p>
If you wish to submit artwork to the Tux&nbsp;Paint
developers for consideration for inclusion in the
official project, or if you wish to release your own copy
of Tux&nbsp;Paint, bundled with your own graphics, you
need an image that is compatible with the GNU <a href=
"../COPYING.txt">General Public License</a> used by
Tux&nbsp;Paint.
</p>
<p>
Images produced by the US government are Public Domain,
but be aware that the US government sometimes uses other
images on the web. <a href=
"http://images.google.com/">Google image</a> queries
including either <code>site:gov</code> or
<code>site:mil</code> will supply many suitable images.
(Note: the *.mil sites include non-military content,
too!)
</p>
<p>
Your own images can be placed in the Public&nbsp;Domain
by declaring it so. (Hire a lawyer if you feel the need
for legal advice.)
</p>
<p>
For personal use, any image you can legitimately modify
and use for your own personal use should be fine.
</p>
</blockquote>
<h3>
Image Size and Orientation:
</h3>
<blockquote>
<p>
You need an image that has a useful orientation.
Perspective is an enemy. Images that show an object from
the corner are difficult to fit into a nice drawing. As a
general rule, telephoto side views are the best. The
impossible ideal is that, for example, two wheels of a
car are perfectly hidden behind the other two.
</p>
<p>
Rotating an image can make it blurry, especially if you
only rotate by a few degrees. Images that don't need
rotation are best, images that need lots of rotation (30
to 60 degrees) are next best, and images that need just a
few degrees are worst. Rotation will also make an image
darker because most image editing software is very bad
about gamma handling. (Rotation is only legitimate for
gamma=1.0 images.)
</p>
<p>
Very large images are more forgiving of mistakes, and
thus easier to work with. Choose an image with an object
that is over 1000 pixels across if you can. You can
shrink this later to hide your mistakes.
</p>
<p>
Be sure that the image is not too grainy, dim, or washed
out.
</p>
<p>
Pay attention to feet and wheels. If they are buried in
something, you will need to draw new ones. If only one is
buried, you might be able to copy the other one as a
replacement.
</p>
</blockquote>
</blockquote>
<h2>
Prepare the image:
</h2>
<blockquote>
<p>
First of all, be sure to avoid re-saving the image as a
JPEG. This causes quality loss. There is a special tool
called <a href=
"http://gnuwin32.sourceforge.net/packages/jpeg.htm">jpegtran</a>
that lets you crop an image without the normal quality
loss. If you want a GUI for it, use <a href=
"http://astron.berkeley.edu/~mperrin/software/ljcrop/">ljcrop</a>.
Otherwise, use it like this:
</p>
<blockquote>
<p>
<code>jpegtran -trim -copy none -crop 512x1728+160+128
&lt; src.jpg &gt; cropped.jpg</code>
</p>
</blockquote>
<p>
Bring that image up in your image editor. If you didn't
crop it yet, you may find that your image editor is very
slow. Rotate and crop the image as needed. Save the image —
choose whatever native format supports layers, masks,
alpha, etc. <a href="http://www.gimp.org/">GIMP</a> users
should choose "XCF", and Adobe Photoshop users should
choose "PSD", for example.
</p>
<p>
If you have rotated or cropped the image in your image
editor, flatten it now. You need to have just one RGB layer
<i>without mask or alpha</i>.
</p>
<p>
Open the layers dialog box. Replicate the one layer several
times. From top to bottom you will need something like
this:
</p>
<ol> <ol>
<li>unmodified image (write-protect this if you can)</li> <li>unmodified image (write-protect this if you can)
<li>an image you will modify &mdash; the "WIP" layer</li> </li>
<li>solid green (write-protect this if you can)</li>
<li>solid magenta (write-protect this if you can)</li> <li>an image you will modify — the "WIP" layer
<li>unmodified image (write-protect this if you can)</li> </li>
<li>solid green (write-protect this if you can)
</li>
<li>solid magenta (write-protect this if you can)
</li>
<li>unmodified image (write-protect this if you can)
</li>
</ol> </ol>
<p>Give the WIP layer a rough initial mask. You might start with a <p>
selection, or by using the grayscale value of the WIP layer. You might Give the WIP layer a rough initial mask. You might start
invert the mask.</p> with a selection, or by using the grayscale value of the
WIP layer. You might invert the mask.
</p>
<p><b>Warning:</b> once you have the mask, you may not rotate or <p>
scale the image normally. This would cause data loss. You will be <b>Warning:</b> once you have the mask, you may not rotate
given special scaling instructions later.</p> or scale the image normally. This would cause data loss.
You will be given special scaling instructions later.
</p>
</blockquote>
</blockquote> <h2>
Prepare the mask:
</h2>
<h2>Prepare the mask:</h2> <blockquote>
<blockquote> <p>
Get used to doing Ctrl-click and Alt-click on the thumbnail
images in the layers dialog. You will need this to control
what you are looking at and what you are editing. Sometimes
you will be editing things you can't see. For example, you
might edit the mask of the WIP layer while looking at the
unmodified image. Pay attention so you don't screw up.
Always verify that you are editing the right thing.
</p>
<p>Get used to doing Ctrl-click and Alt-click on the thumbnail images in the <p>
layers dialog. You will need this to control what you are looking at and Set an unmodified image as what you will view (the top one
what you are editing. Sometimes you will be editing things you can't see. is easiest). Set the WIP mask as what you will edit. At
For example, you might edit the mask of the WIP layer while looking at the some point, perhaps not immediately, you should magnify the
unmodified image. Pay attention so you don't screw up. Always verify that image to about 400% (each pixel of the image is seen and
you are editing the right thing.</p> edited as a 4x4 block of pixels on your screen).
</p>
<p>Set an unmodified image as what you will view (the top one is easiest). <p>
Set the WIP mask as what you will edit. At some point, perhaps not Select parts of the image that need to be 100% opaque or 0%
immediately, you should magnify the image to about 400% (each pixel of opaque. If you can select the object or background somewhat
the image is seen and edited as a 4x4 block of pixels on your screen).</p> accurately by color, do so. As needed to avoid selecting
any pixels that should be partially opaque (generally at
the edge of the object) you should grow, shrink, and invert
the selection.
</p>
<p>Select parts of the image that need to be 100% opaque or 0% opaque. <p>
If you can select the object or background somewhat accurately by Fill the 100% opaque areas with white, and the 0% opaque
color, do so. As needed to avoid selecting any pixels that should be areas with black. This is most easily done by drag-and-drop
partially opaque (generally at the edge of the object) you should from the foreground/background color indicator. You should
grow, shrink, and invert the selection.</p> not see anything happen, because you are viewing the
unmodified image layer while editing the mask of the WIP
layer. Large changes might be noticable in the thumbnail.
</p>
<p>Fill the 100% opaque areas with white, and the 0% opaque areas with <p>
black. This is most easily done by drag-and-drop from the Now you must be zoomed in.
foreground/background color indicator. You should not see anything happen, </p>
because you are viewing the unmodified image layer while editing the mask
of the WIP layer. Large changes might be noticable in the thumbnail.</p>
<p>Now you must be zoomed in.</p> <p>
Check your work. Hide the top unmodified image layer.
Display just the mask, which should be a white object on a
black background (probably with unedited grey at the edge).
Now display the WIP layer normally, so that the mask is
active. This should show your object over top of the next
highest enabled layer, which should be green or magenta as
needed for maximum contrast. You might wish to flip back
and forth between those backgrounds by repeatedly clicking
to enable/disable the green layer. Fix any obvious and easy
problems by editing the mask while viewing the mask.
</p>
<p>Check your work. Hide the top unmodified image layer. Display just the <p>
mask, which should be a white object on a black background (probably Go back to viewing the top unmodified layer while editing
with unedited grey at the edge). Now display the WIP layer normally, so the WIP mask. Set your drawing tool the paintbrush. For the
that the mask is active. This should show your object over top of the brush, choose a small fuzzy circle. The 5x5 size is good
next highest enabled layer, which should be green or magenta as needed for most uses.
for maximum contrast. You might wish to flip back and forth between </p>
those backgrounds by repeatedly clicking to enable/disable the green
layer. Fix any obvious and easy problems by editing the mask while
viewing the mask.</p>
<p>Go back to viewing the top unmodified layer while editing the WIP mask. <p>
Set your drawing tool the paintbrush. For the brush, choose a small fuzzy With a steady hand, trace around the image. Use black
circle. The 5x5 size is good for most uses.</p> around the outside, and white around the inside. Avoid
making more than one pass without switching colors (and
thus sides).
</p>
<p>With a steady hand, trace around the image. Use black around the outside, <p>
and white around the inside. Avoid making more than one pass without Flip views a bit, checking to see that the mask is working
switching colors (and thus sides).</p> well. When the WIP layer is composited over the green or
magenta, you should see a tiny bit of the original
background as an ugly fringe around the edge. If this
fringe is missing, then you made the object mask too small.
The fringe consists of pixels that are neither 100% object
nor 0% object. For them, the mask should be neither 100%
nor 0%. The fringe gets removed soon.
</p>
<p>Flip views a bit, checking to see that the mask is working well. When <p>
the WIP layer is composited over the green or magenta, you should see a View and edit the mask. Select by color, choosing either
tiny bit of the original background as an ugly fringe around the edge. black or white. Most likely you will see unselected specks
If this fringe is missing, then you made the object mask too small. that are not quite the expected color. Invert the
The fringe consists of pixels that are neither 100% object nor 0% object. selection, then paint these away using the pencil tool. Do
For them, the mask should be neither 100% nor 0%. The fringe gets removed this operation for both white and black.
soon.</p> </p>
</blockquote>
<p>View and edit the mask. Select by color, choosing either black or white. <h2>
Most likely you will see unselected specks that are not quite the expected Replace the fringe and junk pixels:
color. Invert the selection, then paint these away using the pencil tool. </h2>
Do this operation for both white and black.</p>
</blockquote> <blockquote>
<p>
Still viewing the mask, select by color. Choose black.
Shrink the selection by several pixels, being sure to NOT
shrink from the edges of the mask (the shrink helps you
avoid and recover from mistakes).
</p>
<h2>Replace the fringe and junk pixels:</h2> <p>
<blockquote> Now disable the mask. View and edit the unmasked WIP layer.
Using the color picker tool, choose a color that is average
for the object. Drag-and-drop this color into the
selection, thus removing most of the non-object pixels.
</p>
<p>Still viewing the mask, select by color. Choose black. Shrink the <p>
selection by several pixels, being sure to NOT shrink from the edges of This solid color will compress well and will help prevent
the mask (the shrink helps you avoid and recover from mistakes).</p> ugly color fringes when Tux&nbsp;Paint scales the image
down. If the edge of the object has multiple colors that
are very different, you should split up your selection so
that you can color the nearby background to be similar.
</p>
<p>Now disable the mask. View and edit the unmasked WIP layer. Using the <p>
color picker tool, choose a color that is average for the object. Now you will paint away the existing edge fringe. Be sure
Drag-and-drop this color into the selection, thus removing most of the that you are editing and viewing the WIP image. Frequent
non-object pixels.</p> layer visibility changes will help you to see what you are
doing. You are likely to use all of:
<p>This solid color will compress well and will help prevent ugly color </p>
fringes when Tux&nbsp;Paint scales the image down. If the edge of the
object has multiple colors that are very different, you should split up
your selection so that you can color the nearby background to be
similar.</p>
<p>Now you will paint away the existing edge fringe. Be sure that you are
editing and viewing the WIP image. Frequent layer visibility changes will
help you to see what you are doing. You are likely to use all of:</p>
<ul> <ul>
<li>composited over green (mask enabled)</li> <li>composited over green (mask enabled)
<li>composited over magenta (mask enabled)</li> </li>
<li>original (the top or bottom layer)</li>
<li>composited over the original (mask enabled)</li> <li>composited over magenta (mask enabled)
<li>raw WIP layer (mask DISABLED)</li> </li>
<li>original (the top or bottom layer)
</li>
<li>composited over the original (mask enabled)
</li>
<li>raw WIP layer (mask DISABLED)
</li>
</ul> </ul>
<p>To reduce accidents, you may wish to select only those pixels that are <p>
not grey in the mask. (Select by color from the mask, choose black, add To reduce accidents, you may wish to select only those
mode, choose white, invert. Alternately: Select all, select by color from pixels that are not grey in the mask. (Select by color from
the mask, subtract mode, choose black, choose white.) If you do this, the mask, choose black, add mode, choose white, invert.
you'll probably want to expand the selection a bit and/or hide the Alternately: Select all, select by color from the mask,
"crawling ants" line that marks the selection.</p> subtract mode, choose black, choose white.) If you do this,
you'll probably want to expand the selection a bit and/or
hide the "crawling ants" line that marks the selection.
</p>
<p>Use the clone tool and the brush tool. Vary the opacity as needed. <p>
Use small round brushes mostly, perhaps 3x3 or 5x5, fuzzy or not. Use the clone tool and the brush tool. Vary the opacity as
(It is generally nice to pair up fuzzy brushes with 100% opacity and needed. Use small round brushes mostly, perhaps 3x3 or 5x5,
non-fuzzy brushes with about 70% opacity.) Unusual drawing modes can be fuzzy or not. (It is generally nice to pair up fuzzy
helpful with semi-transparent objects.</p> brushes with 100% opacity and non-fuzzy brushes with about
70% opacity.) Unusual drawing modes can be helpful with
semi-transparent objects.
</p>
<p>The goal is to remove the edge fringe, both inside and outside of <p>
the object. The inside fringe, visible when the object is composited The goal is to remove the edge fringe, both inside and
over magenta or green, must be removed for obvious reasons. The outside of the object. The inside fringe, visible when the
outside fringe must also be removed because it will become visible object is composited over magenta or green, must be removed
when the image is scaled down. As an example, consider a 2x2 region of for obvious reasons. The outside fringe must also be
pixels at the edge of a sharp-edged object. The left half is black removed because it will become visible when the image is
and 0% opaque. The right half is white and 100% opaque. That is, we scaled down. As an example, consider a 2x2 region of pixels
have a white object on a black background. When Tux&nbsp;Paint scales this at the edge of a sharp-edged object. The left half is black
to 50% (a 1x1 pixel area), the result will be a grey 50% opaque pixel. and 0% opaque. The right half is white and 100% opaque.
The correct result would be a white 50% opaque pixel. To get this That is, we have a white object on a black background. When
result, we would paint away the black pixels. They matter, despite Tux&nbsp;Paint scales this to 50% (a 1x1 pixel area), the
being 0% opaque.</p> result will be a grey 50% opaque pixel. The correct result
would be a white 50% opaque pixel. To get this result, we
would paint away the black pixels. They matter, despite
being 0% opaque.
</p>
<p>Tux&nbsp;Paint can scale images down by a very large factor, so it is <p>
important to extend the edge of your object outward by a great deal. Tux&nbsp;Paint can scale images down by a very large
Right at the edge of your object, you should be very accurate about this. factor, so it is important to extend the edge of your
As you go outward away from the object, you can get a bit sloppy. It is object outward by a great deal. Right at the edge of your
reasonable to paint outward by a dozen pixels or more. The farther you go, object, you should be very accurate about this. As you go
the more Tux&nbsp;Paint can scale down without creating ugly color fringes. outward away from the object, you can get a bit sloppy. It
For areas that are more than a few pixels away from the object edge, you is reasonable to paint outward by a dozen pixels or more.
should use the pencil tool (or sloppy select with drag-and-drop color) to The farther you go, the more Tux&nbsp;Paint can scale down
ensure that the result will compress well.</p> without creating ugly color fringes. For areas that are
</blockquote> more than a few pixels away from the object edge, you
should use the pencil tool (or sloppy select with
<h2>Save the image for Tux Paint</h2> drag-and-drop color) to ensure that the result will
<blockquote> compress well.
</p>
<p>It is very easy to ruin your hard work. Image editors can silently
destroy pixels in 0% opaque areas. The conditions under which this
happens may vary from version to version. If you are very trusting,
you can try saving your image directly as a PNG. Be sure to read it
back in again to verify that the 0% opaque areas didn't turn black or
white, which would create fringes when Tux&nbsp;Paint scales the image down.
If you need to scale your image to save space (and hide your mistakes), you
are almost certain to destroy all the 0% opaque areas. So here is a better
way...</p>
<h3>A Safer Way to Save:</h3>
<blockquote>
<p>Drag the mask from the layers dialog to the unused portion of
the toolbar (right after the last drawing tool). This will create a
new image consisting of one layer that contains the mask data. Scale
this as desired, remembering the settings you use. Often you should
start with an image that is about 700 to 1500 pixels across, and end
up with one that is 300 to 400.</p>
<p>Save the mask image as a NetPBM portable greymap ("<code>.pgm</code>")
file. (If you are using an old release of The&nbsp;GIMP, you might need
to convert the image to greyscale before you can save it.) Choose the
more compact "RAW&nbsp;PGM" format. (The second character of the file
should be the ASCII digit "5", hex byte 0x35.)</p>
<p>You may close the mask image.</p>
<p>Going back to the multi-layer image, now select the WIP layer. As you
did with the mask, drag this from the layers dialog to the toolbar. You
should get a single-layer image of your WIP data. If the mask came along
too, get rid of it. You should be seeing the object and the painted-away
surroundings, without any mask thumbnail in the layers dialog. If you
scaled the mask, then scale this image in exactly the same way. Save
this image as a NetPBM portable pixmap ("<code>.ppm</code>") file.
(Note: ppm, not pgm.) (If you choose the RAW&nbsp;PPM format, the
second byte of the file should be the ASCII digit "6", hex byte 0x36.)</p>
<p>Now you need to merge the two files into one. Do that with the
<a href="http://netpbm.sourceforge.net/">pnmtopng</a> command, like
this:</p>
<blockquote><p><code>
pnmtopng -force -compression 9 -alpha mask.pgm fg.ppm &gt;
final-stamp.png
</code></p></blockquote>
</blockquote> </blockquote>
</blockquote>
</body></html> <h2>
Save the image for Tux Paint
</h2>
<blockquote>
<p>
It is very easy to ruin your hard work. Image editors can
silently destroy pixels in 0% opaque areas. The conditions
under which this happens may vary from version to version.
If you are very trusting, you can try saving your image
directly as a PNG. Be sure to read it back in again to
verify that the 0% opaque areas didn't turn black or white,
which would create fringes when Tux&nbsp;Paint scales the
image down. If you need to scale your image to save space
(and hide your mistakes), you are almost certain to destroy
all the 0% opaque areas. So here is a better way...
</p>
<h3>
A Safer Way to Save:
</h3>
<blockquote>
<p>
Drag the mask from the layers dialog to the unused
portion of the toolbar (right after the last drawing
tool). This will create a new image consisting of one
layer that contains the mask data. Scale this as desired,
remembering the settings you use. Often you should start
with an image that is about 700 to 1500 pixels across,
and end up with one that is 300 to 400.
</p>
<p>
Save the mask image as a NetPBM portable greymap
("<code>.pgm</code>") file. (If you are using an old
release of The&nbsp;GIMP, you might need to convert the
image to greyscale before you can save it.) Choose the
more compact "RAW&nbsp;PGM" format. (The second character
of the file should be the ASCII digit "5", hex byte
0x35.)
</p>
<p>
You may close the mask image.
</p>
<p>
Going back to the multi-layer image, now select the WIP
layer. As you did with the mask, drag this from the
layers dialog to the toolbar. You should get a
single-layer image of your WIP data. If the mask came
along too, get rid of it. You should be seeing the object
and the painted-away surroundings, without any mask
thumbnail in the layers dialog. If you scaled the mask,
then scale this image in exactly the same way. Save this
image as a NetPBM portable pixmap ("<code>.ppm</code>")
file. (Note: ppm, not pgm.) (If you choose the
RAW&nbsp;PPM format, the second byte of the file should
be the ASCII digit "6", hex byte 0x36.)
</p>
<p>
Now you need to merge the two files into one. Do that
with the <a href=
"http://netpbm.sourceforge.net/">pnmtopng</a> command,
like this:
</p>
<blockquote>
<p>
<code>pnmtopng -force -compression 9 -alpha mask.pgm
fg.ppm &gt; final-stamp.png</code>
</p>
</blockquote>
</blockquote>
</blockquote>
</body>
</html>

1964
docs/en/html/EXTENDING.html
View file

File diff suppressed because it is too large Load diff

1682
docs/en/html/FAQ.html
View file

File diff suppressed because it is too large Load diff

7167
docs/en/html/OPTIONS.html
View file

File diff suppressed because it is too large Load diff

2505
docs/en/html/README.html
View file

File diff suppressed because it is too large Load diff